9000FRU(1), Toshiba

[ Pobierz całość w formacie PDF ]
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
9000 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 0&1)
2. Flat head Screwdriver
3. Security Torx (Size 7)
4. Case Separator
5. ESD Wrist Strap
6. ESD mats
7. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
Tough Enough for Today’s World.
TM
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
9000 Series
TABLE OF CONTENTS:
TOSHIBA
Tough Enough for Today’s World.
TM
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
9000 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Release
lever
Battery
Pack
PC card
Eject button
1. Turn the computer upside down as shown.
2. Slide the
battery release lever
in the direction of the
arrow.
3. Lift out the
battery
.
1. Press the
eject button
for the PC card you want to
remove.
2. Press the extended
eject button
to pop the PC Card
out.
3. Grasp the
PC card
and remove it.
NOTE
: Before removing any PC Card device, make sure
it is “STOPPED” in the PC Card manager.
SELECT BAY REMOVAL
CD-R/W/DVD-ROM DRIVE DISASSEMBLY
CD-R/W/DVD-ROM
drive
Base cover
Connector
M2x3 silver
screws
Release lever
Select bay
device
M2x8 silver
screws
Connector cover
1. Turn the computer upside down.
2. Slide the
release lever
in the direction of the arrow.
3. Pull out the
select bay device
in the direction of the
arrow.
1. Remove
five M2x3 silver screws
securing the base
cover and lift off the
base cover
.
2. Remove
two M2x8 silver screws
securing the
connector cover.
3. Remove the
connector
and the
connector cover
from the CD- R/W/DVD-ROMdrive.
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
9000 Series
MEMORY MODULE REMOVAL
M2.5x2.8
silver flat
head screws
Memory cover
Memory clips
1. Turn the computer upside down.
2. Remove
two
M2.5x2.8 silver flat head screws
and remove the
memory
cover
.
3. Spread the
memory clips
outward and pull the
memory module
out of the connector on a
45 degree angle.
BLUETOOTH CARD REMOVAL
Bluetooth cover
M2x4 black security torx screw
Plastic insulator
Bluetooth card
Coaxial cable
1. Remove
one M2x4 black security torx screw
securing
the bluetooth cover.
2. Lift out the
bluetooth cover
.
3. Disconnect the
coaxial cable
from the bluetooth card.
4. Lift up the
plastic insulator
to disconnect the card.
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
9000 Series
HDD REMOVAL
HDD REMOVAL
M2.5x8 silver screw
HDD cover
Plastic Tab
HDD pack
1. Turn the computer upside down.
2. Remove
one M2.5x8 silver screw
securing HDD cover.
3. Remove the
HDD cover
.
4. Unfold the
plastic tab
and pull to remove the HDD
from the bay.
KEYBOARD REMOVAL
HDD
bracket
HDD
HDD connector
M3x4 flat head brass screws
M2.5x16 silver screw
5. Remove
four M3x4 brass flat head screws
securing
the HDD to the bracket and lift the drive out of the
bracket
.
6. Unplug the
HDD connector
from the drive.
1. Turn the computer upside down.
2. Remove
one M2.5x16 silver screw
securing the
keyboard on the bottom cover.
TOSHIBA
Tough Enough for Today’s World.
[ Pobierz całość w formacie PDF ]

9000FRU(1), Toshiba

Podstrony